Version 8.3.90 {============================= Main Part ======================================} [general] File = C:\Documents and Settings\Administrator\デスクトップ\EN_sample3.lpp Date = 15-11-2009 Time = 14:48:28 Configuration = C:\Program Files\LISE\config\EN_RCNP.lcn Optionsfile = default.lopt Title = RCNP(EN) BlockStructure = SDSWMMSSDSMMMS [settings] A,Z,Q = 18O 8+ ; Mass ElementName Charge+ Beam Energy = 80 MeV/u Intensity = 50 pnA ; enA,pna,pps,kW RF frequency = 20 MHz Settings on A,Z = 12Be ; Mass ElementName Charge+ Beam [OpticsBeam] BX = 2.5 (ｱ)mm ; one-half the horisontal beam extent (x) BT = 4 (ｱ)mrad ; one-half the horisontal beam divergence(x') BY = 2.5 (ｱ)mm ; one-half the vertical beam extent (y) BF = 4 (ｱ)mrad ; one-half the vertical beam divergence (y') BL = 0 (ｱ)mm BD = 0.05 (ｱ)% ; one-half of the momentum spread (dp/p) ShiftX = 0 mm ; beam respect to the spectrometer axis AngleX = 0 mrad ; beam respect to the spectrometer axis ShiftY = 0 mm ; beam respect to the spectrometer axis AngleY = 0 mrad ; beam respect to the spectrometer axis Scheme Angle = 0 degrees [SlitsBeforeTarget] Shape = 0 ; 0-slits, 1-ellipse X_action = 1,0 ; Use 1/0, Show 1/0 X_size = 1,-50.00,-50.0,50.00,50.0 ; joint,Left,L-limit,Right,R-limit Y_action = 1,0 ; Use 1/0, Show 1/0 Y_size = 1,-50.00,-50.0,50.00,50.0 ; joint,Bottom,B-limit,Top,T-limit [options] NP simple = 64 ; Number of points in distribution NP charge states = 32 ; Number of points in distribution NP wedge = 16 ; Number of points in distribution Charge states = No ; No & Yes AngAcceptance shape = 0 ; 0-simple rectangle, 1-gaussian AngAacceptance method = 0 ; 0-jacobian, 1-projection Prim.beam scatter = 0 ; 0-without, 1-with Delta peak = 0 ; 0-without, 1-with BrhoMeanMax = 1 ; 0-Max, 1-Mean BrhoMeMaLeRi = 3 ; 0-Max, 1-Mean, 2-Left, 3-Right /for fission/ [target] Target contents = 0,4,4,9.012 ; Nomer,Z,Atoms,Mass Target thickness = 4,10.12,1.848,0,0 ; State,Thickness,density,angle,SolidGas Target fusion compound = 0 Degrader contents = 0,6,1,12.011 ; Nomer,Z,Atoms,Mass Degrader thickness = 0,0,2.26,0,0 ; State,Thickness,density,angle,SolidGas [mechanism] Reaction = 0 ; 0 - fragm, 1 - fusion-resid, 2 - fusion-fission CalcOther = 1 ; calculate other reactions V calculation = 0 ; 0 - constant, 1 - Borrel, 2 - Rami, 3-convolution, 4-two body reaction V_opt/Vbeam = 1 ; default 1 Velocity_exceed = 1 ; 0 - without, 1-with - two-body recations velocity corrections Binding Energy for Vf/Vp = 8 MeV ; Binding energy for Borrel's expression Shift for Vf/Vp calc = 0 Prefragment_Rami = 1 ; 1-Yes, 0-No Sigma0 = 90 MeV/c ; default 90 SigmaD = 200 MeV/c ; default 200 SigmaM = 87 MeV/c ; default 87 Method v-sigma = 0 ; 0 - Goldhaber, 1-Morrissey,2-Friedman,3-Convolution G_Surface = 0.95 MeV/fm^2 Symmetry around half_Ab = 1 ; 1 - yes, 0-no Pfaff pickup correction = 1 ; 1 - yes, 0-no Sigma corr 0 = 0 ; Coulomb energy Sigma corr 1 = 0 ; Projectile mass Friedman mode = 2 ; 0-Qgg, 1-Surface, 2-Qgg+Surface Prefragment_Fri = 1 ; 1-Yes, 0-No Coulomb_Friedman = 1 ; 1-Yes, 0-No K_Morr = 8 MeV/A ; E/A=8MeV/A default; D.Morrissey coef. K_MorHalf = 8 MeV/A ; E/A=8MeV/A default at Afrag=Aproj/2; D.Morrissey coef. BarrierShape = 1 ; 0- classical, 1-quantum mech. H_omega = 5 MeV ; default 5 AA_fast = 0 ; 1-Yes, 0-No Width Coef = 1 ; for Leon's charge state distribution gZt Correction = 1 ; for Leon's charge state distribution Cross section = File ; Fit & File Charge method = 0 ; charge calculations method 0-5 Cross Section = 2 ; cross section calculations method 0-4 Energy Loss = 1 ; energy loss calculation method 0-3 Anglular straggling = 0 ; 0-LISE, 1-ATIMA StragglingCoef1 = 0.217 StragglingCoef2 = 1.12 Energy straggling = 1 ; 0-LISE, 1-ATIMA EnergyStragMethod = 1 ; 0-integrate, 1-table EnergyStragShape = 1 ; 0-Gauss, 1-Landau-Vavilov EquilThickness = 1 ; 0-Charge, 1-Global MassMethod = 0 ; 0-DB+calcul, 1 + just calcul MassDataBase = 0 ; 0-A&W, 1-User ME Mass formula = 2 ; 0-LDM, 1-Myerer, 2: 1+corrections UseChargeForEnergy = 2 ; 0-No, 1-Yes, 2-Auto EnergyValueAuto = 30 ; default value 30 MeV/u EquilibriumMode = 0 ; 0-Equil, 1-NonEquil UB_Global = 70 ; default 70 MeV/u MinZ_Global = 29 ; default Z>=29 ChargeStateOptim = 1 ; 0-No, 1-Yes EPAX_p_Norm = 1 EPAX_p_Un = 1.65 EPAX_p_Up0 = 1.79 EPAX_p_Up1 = 0.00472 EPAX_p_Up2 = -1.3e-5 EPAX_p_H = 1 [fission] FisAngDistShape = 0 ; 0-isotropic; 1-anisotropic FisMomCutForAngDist = 2 ; 0-dont use; 1-use just MatrixKinematics; 2-use for all; (default 2) OddEvenCorrections = 1 ; 0-dont use; 1-use PostScissionEvaporation = 1 ; 0-dont use; 1-use DeexcitFunctionPoints = 0 ; 0- average deexcitation energy; 1- 3 points; 2 - manually FisEXmanually = 20 ; Excitation energy manually FisCSmanually = 1000 ; Cross section manually FisTXEmethod = 0 ; 0-from Edissipated, 1 from Q-value Fis_f = 0.0045 ; default 0.0045 FisEXsigma = 5.5 MeV ; default 5.5 FisCS_Global = 1e-9 FisCS_TKE = 1e-6 N0 = 82 ; default 82 dU0 = -2.5 ; default -2.5 C0 = 1.4 ; default 1.4 cpol0 = 0.65 ; default 0.65 width0 = 0.63 ; default 0.63 N1 = 90 ; default 90 dU1 = -5.5 ; default -5.5 C1 = 0.16 ; default 0.16 cpol1 = 0.55 ; default 0.55 width1 = 0.97 ; default 0.97 [charge_suppression] FragInd = 1e-3 FragTotal = 1e-4 BeamInd = 1e-6 BeamTotal = 1e-8 [convolution] Convolution mode = 0 ; 0-Qgg, 1-Surface, 2-Qgg+Surface SigmaConv = 91.5 MeV/c ; default 90 for Convolution CoefConv_0 = 3.344 CoefConv_1 = 5.758 CoefConv_2 = 2.936 ShiftConv_0 = 0.158 ShiftConv_1 = 0.149 ShiftConv_2 = 0.153 [evaporation] NP evaporation = 32 ; Number of points in distribution EvapMethod = 2 StateDensityMode = 0 ; 0, 1+pairing, 2+shell EvapUnstableNuclei = 0 ; 0 - only stable,1 +unstable Tunnelling = 1 ; 0 - off,1 - on R_Evaporation = 6 fm ; correction for the effective Coulomb barrier Mode_Apf_manual = 0 ; 1-manual, 0-auto Energy_in_T = 2 ; default 2 EvaporationVelocity = 0 ; 0 - quality, 1 -fast DeltaOddEvenEvap = 12 DeltaOddEvenFission = 14 BreakupTemperature250 = 4.7 BreakupTemperature150 = 5.9 BreakupTemperature050 = 8 BreakupDiffuseness = 0.05 DissipationKramers = 0 ; 0 - no, 1 - use DissipationStepFunction = 1 ; 0 - no, 1 - use DissipationBeta = 1 ; default 2.0 mode_1n = 1 ; 1-Yes, 0-No mode_2n = 0 ; 1-Yes, 0-No mode_1p = 1 ; 1-Yes, 0-No mode_2p = 0 ; 1-Yes, 0-No mode_a = 1 ; 1-Yes, 0-No mode_d = 0 ; 1-Yes, 0-No mode_t = 0 ; 1-Yes, 0-No mode_3he = 0 ; 1-Yes, 0-No mode_fis = 1 ; 1-Yes, 0-No mode_brk_up = 1 ; 1-Yes, 0-No mode_gamma = 0 ; 1-Yes, 0-No [fission_barrier] FissionBarrierFactor = 1 FissionBarrierMode = 1 ; #0-4 OddEvenCorrections = 1 ; 1-Yes, 0-No ShellCorrections = 1 ; 1-Yes, 0-No FB_InOutMax = 2 ; #0-2 - in/out/max ModeForUser = 1 ; #0-2 NdeltaOddEven = 2.5 ZdeltaOddEven = 9 [excitation_energy] GeomAA_Correction = 1 ; 0 - don't use,1 - use -default Friction = 0 ; 0 - off,1 - on Ev_A_SigmaCoef = 9.6 G_FrictionCoef1 = 6.5 G_FrictionCoef2 = 0 G_FactorCoef1 = 1.5 G_FactorCoef2 = 2.5 DepthHole = 40 EE_C_mode = 0 EE_C_Zbound = 0 EE_C_Abound = 0 EnergyCoef_CA0 = 0 EnergyCoef_CA1 = 3 EnergyCoef_CA2 = 0 EnergyCoef_CB0 = 0 EnergyCoef_CB1 = 13.3 EnergyCoef_CB2 = 0 SigmaCoef_CA0 = 0 SigmaCoef_CA1 = 2 SigmaCoef_CA2 = 0 SigmaCoef_CB0 = 0 SigmaCoef_CB1 = 9.6 SigmaCoef_CB2 = 0 [evapauto] tun_a0 = -0.71783 tun_a1 = 0.41085 tun_a2 = 0.12612 A_Bound = 300 ; mass A_Pairing = 70 ; mass [plot] Start target = Detector ; Detector & RF Start of TOF = T1 Stop of TOF = M4 dE-detector-1st = M6 dE-detector-2nd = M2 TKE-detector = M1 PlotBrho = D1 PlotWedge = D2 X-detector = M1 Y-detector = M2 Tilting = M1 Stopper = M2 RF resolution = 0.5 ns ; for TOF's plot Plot threshold = 1e-10 pps ; minimal value for plot scale Shift of TOF for RF = 0 ns ; for dE-TOF plot with RF Fraction of RF trigger = 1 TKE_calibration = 1,1,0,MeV ; Input PV(0) or CH(1), A, B, dimension [cs_file] AppendOverwrite = 1 AttachedInside = 1 ShowCSinPlot = 1 Chi2 = 0 CSfilename = [sec_reactions] NP sec.reactions = 16 ; Number of points in distribution Secondary reactions = 0 ; 0/1 - use secondary reactions in calculations fiss_FilterUse0 = 1 fiss_FilterUse1 = 1 fiss_FilterUse2 = 1 fiss_ellipse = 5 fiss_NdeltaTop = 0 fiss_ZdeltaTop = 0 fiss_NdeltaBot = 25 fiss_ZdeltaBot = 20 frag_FilterUse0 = 3 frag_FilterUse1 = 3 frag_FilterUse2 = 3 frag_ellipse = 4 frag_NdeltaTop = 5 frag_ZdeltaTop = 5 frag_NdeltaBot = 6 frag_ZdeltaBot = 6 [abrasion_fission] HML_show = 7 ; HML-bits BoundaryLow = 40 MeV BoundaryHigh = 180 MeV LowEx_nucleus = 39Ar ; Mass ElementName Charge+ Beam L_CS_Ex = 3.000e+02 25.00 5.00 ; mb, MeV, Mev MidEx_nucleus = 34S ; Mass ElementName Charge+ Beam M_CS_Ex = 1.000e+03 100.00 5.00 ; mb, MeV, Mev HighEx_nucleus = 28Si ; Mass ElementName Charge+ Beam H_CS_Ex = 8.000e+02 250.00 5.00 ; mb, MeV, Mev [gamma_detection] coef0 = 1.39905 coef1 = 0.69523 coef2 = -5.92199 coef3 = 1 coef4 = 0.269 area = 38.81 cm^2 distance = 20.4 cm geom_eff = 1 % mode = 2 ; 0-area,1-dist,2-geom threshold = 100 keV start = 0 mks gate = 10 mks Energy_cell = 1330 keV Refer_GperF = 0.01 g/f UseGeom = 0 ; yes-1, no-0 UseEnergy = 1 ; yes-1, no-0 [sec_target] NP2 = 16 ; Dimension tertiary = 1 ; yes-1, no-0 method = 0 ; 0-distribution, 1-gauss, 2-d4 threshold = 1e-5 Pr_z0 = 1 Pr_z1 = 100 Pr_n0 = 0 Pr_n1 = 200 Dr_z0 = 1 Dr_z1 = 8 Dr_n0 = 0 Dr_n1 = 10 [cross sections] [previous] Lowerst = 1H ; Mass ElementName Charge+ Beam Highest = 18O 8+ ; Mass ElementName Charge+ Beam {============================= BLOCK S1 - Drift ======================================} [S1_General] Name = Drift 1,0 ; Name of Block, Constant name 1/0 Available = 1 ; Use 1/0 Length = 3.120000 m ; Length block for optical blocks [S1_slits] Shape = 0 ; 0-slits, 1-ellipse X_action = 0,0 ; Use 1/0, Show 1/0 X_size = 1,-20.00,-50.0,20.00,50.0 ; joint,Left,L-limit,Right,R-limit Y_action = 0,0 ; Use 1/0, Show 1/0 Y_size = 1,-20.00,-50.0,20.00,50.0 ; joint,Bottom,B-limit,Top,T-limit [S1_optics] row1 = +1.0000e+00,+0.0000e+00,+0.0000e+00,+0.0000e+00,+0.0000e+00,+0.0000e+00 row2 = +0.0000e+00,+1.0000e+00,+0.0000e+00,+0.0000e+00,+0.0000e+00,+0.0000e+00 row3 = +0.0000e+00,+0.0000e+00,+1.0000e+00,+0.0000e+00,+0.0000e+00,+0.0000e+00 row4 = +0.0000e+00,+0.0000e+00,+0.0000e+00,+1.0000e+00,+0.0000e+00,+0.0000e+00 row5 = +0.0000e+00,+0.0000e+00,+0.0000e+00,+0.0000e+00,+1.0000e+00,+0.0000e+00 row6 = +0.0000e+00,+0.0000e+00,+0.0000e+00,+0.0000e+00,+0.0000e+00,+1.0000e+00 [S1_AngAcceptance] X-Use = 1 ; Use 1/0 X-Value = 20 mrad ; acceptance Y-Use = 1 ; Use 1/0 Y-Value = 14 mrad ; acceptance [S1_DriftSettings] Mode = 0 ; Standard 1 / Beamline 0 ShowLength = 0 ; Brho 1 / Length 0 {============================= BLOCK D1 - Dipole ======================================} [D1_General] Name = Dipole 1,0 ; Name of Block, Constant name 1/0 Available = 1 ; Use 1/0 Length = 1.160000 m ; Length block for optical blocks Before_Quad = 2 ; number of quadrupoles before optic device After_Quad = 2 ; number of quadrupoles after optic device QB_DontDraw = 0 QA_DontDraw = 0 ZmQ = 0 ; Z - Q = charge state settings Calibration file = NULL [D1_slits] Shape = 0 ; 0-slits, 1-ellipse X_action = 1,1 ; Use 1/0, Show 1/0 X_size = 1,-17.00,-80.0,17.00,80.0 ; joint,Left,L-limit,Right,R-limit Y_action = 1,0 ; Use 1/0, Show 1/0 Y_size = 1,-100.00,-100.0,100.00,100.0 ; joint,Bottom,B-limit,Top,T-limit [D1_optics] row1 = -1.9000e+00,+0.0000e+00,+0.0000e+00,+0.0000e+00,+0.0000e+00,+1.7320e+01 row2 = +0.0000e+00,-5.2600e-01,+0.0000e+00,+0.0000e+00,+0.0000e+00,+0.0000e+00 row3 = +0.0000e+00,+0.0000e+00,-3.9000e+00,+0.0000e+00,+0.0000e+00,+0.0000e+00 row4 = +0.0000e+00,+0.0000e+00,+0.0000e+00,-2.5600e-01,+0.0000e+00,+0.0000e+00 row5 = +0.0000e+00,+0.0000e+00,+0.0000e+00,+0.0000e+00,+1.0000e+00,+0.0000e+00 row6 = +0.0000e+00,+0.0000e+00,+0.0000e+00,+0.0000e+00,+0.0000e+00,+1.0000e+00 [D1_AngAcceptance] X-Use = 1 ; Use 1/0 X-Value = 20 mrad ; acceptance Y-Use = 1 ; Use 1/0 Y-Value = 14 mrad ; acceptance [D1_DipoleSettings] Brho = 3.37552 Tm ; magnetic rigidity Angle = 30 degrees Radius = 2.2 m {============================= BLOCK S2 - Drift ======================================} [S2_General] Name = Drift 2,0 ; Name of Block, Constant name 1/0 Available = 1 ; Use 1/0 Length = 3.000000 m ; Length block for optical blocks [S2_slits] Shape = 0 ; 0-slits, 1-ellipse X_action = 0,0 ; Use 1/0, Show 1/0 X_size = 1,-20.00,-50.0,20.00,50.0 ; joint,Left,L-limit,Right,R-limit Y_action = 0,0 ; Use 1/0, Show 1/0 Y_size = 1,-20.00,-50.0,20.00,50.0 ; joint,Bottom,B-limit,Top,T-limit [S2_optics] row1 = +1.0000e+00,+0.0000e+00,+0.0000e+00,+0.0000e+00,+0.0000e+00,+0.0000e+00 row2 = +0.0000e+00,+1.0000e+00,+0.0000e+00,+0.0000e+00,+0.0000e+00,+0.0000e+00 row3 = +0.0000e+00,+0.0000e+00,+1.0000e+00,+0.0000e+00,+0.0000e+00,+0.0000e+00 row4 = +0.0000e+00,+0.0000e+00,+0.0000e+00,+1.0000e+00,+0.0000e+00,+0.0000e+00 row5 = +0.0000e+00,+0.0000e+00,+0.0000e+00,+0.0000e+00,+1.0000e+00,+0.0000e+00 row6 = +0.0000e+00,+0.0000e+00,+0.0000e+00,+0.0000e+00,+0.0000e+00,+1.0000e+00 [S2_AngAcceptance] X-Use = 0 ; Use 1/0 X-Value = 1000 mrad ; acceptance Y-Use = 0 ; Use 1/0 Y-Value = 1000 mrad ; acceptance [S2_DriftSettings] Mode = 0 ; Standard 1 / Beamline 0 ShowLength = 0 ; Brho 1 / Length 0 {============================= BLOCK W1 - Wedge ======================================} [W1_General] Name = Degrader,1 ; Name of Block, Constant name 1/0 Available = 1 ; Use 1/0 Length = 0.000000 m ; Length block for optical blocks [W1_Compound] contents1 = 0,13,1,26.982 ; Nomer,Z,Atoms,Mass thickness = 4,2.55,2.702,0,0 ; State,Thickness,density,angle,SolidGas Defect = 0,0.1 ; [0] choice - % or micron at 0 degree, [1]=value; [W1_slits] Shape = 1 ; 0-slits, 1-ellipse X_action = 0,0 ; Use 1/0, Show 1/0 X_size = 1,-20.00,-50.0,20.00,50.0 ; joint,Left,L-limit,Right,R-limit Y_action = 0,0 ; Use 1/0, Show 1/0 Y_size = 1,-20.00,-50.0,20.00,50.0 ; joint,Bottom,B-limit,Top,T-limit [W1_ProdTarget] ProdTarget = 0 ; 1 - Yes / 0 - No [W1_WedgeSettings] ProfileMode = 1 ; 0-Wedge,1-Homo,2-Curved PhysProfileDesirable = 0 ; 0-Achrom,1-Monoch,2-user-defined Angle = 3.89090 mrad ; wedge slope for the mode (0-Wedge) Direction = 0 ; x=0, y=1 CalculateForBlock = Drift 4 ProfileFileName = NULL ExternalInternal = 0 ; external=0 / internal=1 ReadInternal = 0 ; 1 - Yes / 0 - No {============================= BLOCK M1 - Material ======================================} [M1_General] Name = Si,1 ; Name of Block, Constant name 1/0 Available = 1 ; Use 1/0 Length = 0.000000 m ; Length block for optical blocks [M1_Compound] contents1 = 0,14,1,28.086 ; Nomer,Z,Atoms,Mass thickness = 0,0,2.321,0,0 ; State,Thickness,density,angle,SolidGas Defect = 1,0 ; [0] choice - % or micron at 0 degree, [1]=value; ResolutionE = 1,0.2 ; [0] choice - % or MeV, [1]=value; Resolution2 = 0.1,0.05,0.05 ns,mm,mm ; Time&X&Y space [M1_slits] Shape = 1 ; 0-slits, 1-ellipse X_action = 0,0 ; Use 1/0, Show 1/0 X_size = 97018880,-20.00,-50.0,20.00,50.0 ; joint,Left,L-limit,Right,R-limit Y_action = 0,0 ; Use 1/0, Show 1/0 Y_size = 261,-20.00,-50.0,20.00,50.0 ; joint,Bottom,B-limit,Top,T-limit [M1_BlockCalibration] TOF = 1,1,0,ns ; Input PV(0) or CH(1), A, B, dimension dE = 1,1,0,MeV ; Input PV(0) or CH(1), A, B, dimension X = 1,1,0,mm ; Input PV(0) or CH(1), A, B, dimension Y = 1,1,0,mm ; Input PV(0) or CH(1), A, B, dimension [M1_ProdTarget] ProdTarget = 0 ; 1 - Yes / 0 - No {============================= BLOCK M2 - Material ======================================} [M2_General] Name = PPAC,1 ; Name of Block, Constant name 1/0 Available = 1 ; Use 1/0 Length = 0.000000 m ; Length block for optical blocks [M2_Compound] contents1 = 0,1,10,1.008 ; Nomer,Z,Atoms,Mass contents2 = 1,6,4,12.011 ; Nomer,Z,Atoms,Mass thickness = 0,0,0.0012,0,1 ; State,Thickness,density,angle,SolidGas Defect = 1,0 ; [0] choice - % or micron at 0 degree, [1]=value; ResolutionE = 1,0.2 ; [0] choice - % or MeV, [1]=value; Resolution2 = 0.1,0.05,0.05 ns,mm,mm ; Time&X&Y space [M2_slits] Shape = 1 ; 0-slits, 1-ellipse X_action = 0,0 ; Use 1/0, Show 1/0 X_size = 17433864,-20.00,-50.0,20.00,50.0 ; joint,Left,L-limit,Right,R-limit Y_action = 0,0 ; Use 1/0, Show 1/0 Y_size = 541065216,-20.00,-50.0,20.00,50.0 ; joint,Bottom,B-limit,Top,T-limit [M2_BlockCalibration] TOF = 1,1,0,ns ; Input PV(0) or CH(1), A, B, dimension dE = 1,1,0,MeV ; Input PV(0) or CH(1), A, B, dimension X = 1,1,0,mm ; Input PV(0) or CH(1), A, B, dimension Y = 1,1,0,mm ; Input PV(0) or CH(1), A, B, dimension [M2_ProdTarget] ProdTarget = 0 ; 1 - Yes / 0 - No {============================= BLOCK S3 - Drift ======================================} [S3_General] Name = Drift 3,0 ; Name of Block, Constant name 1/0 Available = 1 ; Use 1/0 Length = 0.000000 m ; Length block for optical blocks [S3_slits] Shape = 0 ; 0-slits, 1-ellipse X_action = 0,0 ; Use 1/0, Show 1/0 X_size = 1,-34.64,-50.0,34.64,50.0 ; joint,Left,L-limit,Right,R-limit Y_action = 0,0 ; Use 1/0, Show 1/0 Y_size = 0,-20.00,-50.0,20.00,50.0 ; joint,Bottom,B-limit,Top,T-limit [S3_optics] row1 = +1.0000e+00,+0.0000e+00,+0.0000e+00,+0.0000e+00,+0.0000e+00,+4.3130e+00 row2 = +0.0000e+00,+1.0000e+00,+0.0000e+00,+0.0000e+00,+0.0000e+00,+0.0000e+00 row3 = +0.0000e+00,+0.0000e+00,+1.0000e+00,+0.0000e+00,+0.0000e+00,+0.0000e+00 row4 = +0.0000e+00,+0.0000e+00,+0.0000e+00,+1.0000e+00,+0.0000e+00,+0.0000e+00 row5 = +0.0000e+00,+0.0000e+00,+0.0000e+00,+0.0000e+00,+1.0000e+00,+0.0000e+00 row6 = +0.0000e+00,+0.0000e+00,+0.0000e+00,+0.0000e+00,+0.0000e+00,+1.0000e+00 [S3_AngAcceptance] X-Use = 1 ; Use 1/0 X-Value = 20 mrad ; acceptance Y-Use = 1 ; Use 1/0 Y-Value = 14 mrad ; acceptance [S3_DriftSettings] Mode = 0 ; Standard 1 / Beamline 0 ShowLength = 0 ; Brho 1 / Length 0 {============================= BLOCK S4 - Drift ======================================} [S4_General] Name = Drift 4,0 ; Name of Block, Constant name 1/0 Available = 1 ; Use 1/0 Length = 2.900000 m ; Length block for optical blocks [S4_slits] Shape = 0 ; 0-slits, 1-ellipse X_action = 0,0 ; Use 1/0, Show 1/0 X_size = 1,-20.00,-50.0,20.00,50.0 ; joint,Left,L-limit,Right,R-limit Y_action = 0,0 ; Use 1/0, Show 1/0 Y_size = 1,-20.00,-50.0,20.00,50.0 ; joint,Bottom,B-limit,Top,T-limit [S4_optics] row1 = +1.0000e+00,+0.0000e+00,+0.0000e+00,+0.0000e+00,+0.0000e+00,+0.0000e+00 row2 = +0.0000e+00,+1.0000e+00,+0.0000e+00,+0.0000e+00,+0.0000e+00,+0.0000e+00 row3 = +0.0000e+00,+0.0000e+00,+1.0000e+00,+0.0000e+00,+0.0000e+00,+0.0000e+00 row4 = +0.0000e+00,+0.0000e+00,+0.0000e+00,+1.0000e+00,+0.0000e+00,+0.0000e+00 row5 = +0.0000e+00,+0.0000e+00,+0.0000e+00,+0.0000e+00,+1.0000e+00,+0.0000e+00 row6 = +0.0000e+00,+0.0000e+00,+0.0000e+00,+0.0000e+00,+0.0000e+00,+1.0000e+00 [S4_AngAcceptance] X-Use = 0 ; Use 1/0 X-Value = 1000 mrad ; acceptance Y-Use = 0 ; Use 1/0 Y-Value = 1000 mrad ; acceptance [S4_DriftSettings] Mode = 0 ; Standard 1 / Beamline 0 ShowLength = 0 ; Brho 1 / Length 0 {============================= BLOCK D2 - Dipole ======================================} [D2_General] Name = Dipole 2,1 ; Name of Block, Constant name 1/0 Available = 1 ; Use 1/0 Length = 1.160000 m ; Length block for optical blocks Before_Quad = 2 ; number of quadrupoles before optic device After_Quad = 2 ; number of quadrupoles after optic device QB_DontDraw = 0 QA_DontDraw = 0 ZmQ = 0 ; Z - Q = charge state settings Calibration file = NULL [D2_slits] Shape = 0 ; 0-slits, 1-ellipse X_action = 0,0 ; Use 1/0, Show 1/0 X_size = 1,-20.00,-500.0,20.00,500.0 ; joint,Left,L-limit,Right,R-limit Y_action = 1,0 ; Use 1/0, Show 1/0 Y_size = 1,-50.00,-500.0,50.00,500.0 ; joint,Bottom,B-limit,Top,T-limit [D2_optics] row1 = -1.0530e+00,+0.0000e+00,+0.0000e+00,+0.0000e+00,+0.0000e+00,+2.2780e+01 row2 = +0.0000e+00,+1.0000e+00,+0.0000e+00,+0.0000e+00,+0.0000e+00,+2.0000e-04 row3 = +0.0000e+00,+0.0000e+00,-3.5900e-01,+0.0000e+00,+0.0000e+00,+0.0000e+00 row4 = +0.0000e+00,+0.0000e+00,+0.0000e+00,+1.0000e+00,+0.0000e+00,+0.0000e+00 row5 = +0.0000e+00,+0.0000e+00,+0.0000e+00,+0.0000e+00,+1.0000e+00,+0.0000e+00 row6 = +0.0000e+00,+0.0000e+00,+0.0000e+00,+0.0000e+00,+0.0000e+00,+1.0000e+00 [D2_AngAcceptance] X-Use = 1 ; Use 1/0 X-Value = 20 mrad ; acceptance Y-Use = 1 ; Use 1/0 Y-Value = 14 mrad ; acceptance [D2_DipoleSettings] Brho = 3.12401 Tm ; magnetic rigidity Angle = 30 degrees Radius = 2.2 m {============================= BLOCK S5 - Drift ======================================} [S5_General] Name = Drift 5,0 ; Name of Block, Constant name 1/0 Available = 1 ; Use 1/0 Length = 3.480000 m ; Length block for optical blocks [S5_slits] Shape = 0 ; 0-slits, 1-ellipse X_action = 0,0 ; Use 1/0, Show 1/0 X_size = 1,-0.50,-50.0,0.50,50.0 ; joint,Left,L-limit,Right,R-limit Y_action = 0,0 ; Use 1/0, Show 1/0 Y_size = 1,-10.00,-50.0,10.00,50.0 ; joint,Bottom,B-limit,Top,T-limit [S5_optics] row1 = -1.0520e+00,+0.0000e+00,+0.0000e+00,+0.0000e+00,+0.0000e+00,+0.0000e+00 row2 = +0.0000e+00,-9.5050e-01,+0.0000e+00,+0.0000e+00,+0.0000e+00,+0.0000e+00 row3 = +0.0000e+00,+0.0000e+00,+3.0000e-03,+0.0000e+00,+0.0000e+00,+0.0000e+00 row4 = +0.0000e+00,+0.0000e+00,+0.0000e+00,-3.0000e+00,+0.0000e+00,+0.0000e+00 row5 = +0.0000e+00,+0.0000e+00,+0.0000e+00,+0.0000e+00,+1.0000e+00,+0.0000e+00 row6 = +0.0000e+00,+0.0000e+00,+0.0000e+00,+0.0000e+00,+0.0000e+00,+1.0000e+00 [S5_AngAcceptance] X-Use = 0 ; Use 1/0 X-Value = 1000 mrad ; acceptance Y-Use = 0 ; Use 1/0 Y-Value = 1000 mrad ; acceptance [S5_DriftSettings] Mode = 0 ; Standard 1 / Beamline 0 ShowLength = 0 ; Brho 1 / Length 0 {============================= BLOCK M3 - Material ======================================} [M3_General] Name = F2UPPAC,1 ; Name of Block, Constant name 1/0 Available = 1 ; Use 1/0 Length = 0.000000 m ; Length block for optical blocks [M3_Compound] contents1 = 0,14,1,28.086 ; Nomer,Z,Atoms,Mass thickness = 0,0,2.321,0,0 ; State,Thickness,density,angle,SolidGas Defect = 1,0 ; [0] choice - % or micron at 0 degree, [1]=value; ResolutionE = 0,0.5 ; [0] choice - % or MeV, [1]=value; Resolution2 = 0.1,0.3,0.3 ns,mm,mm ; Time&X&Y space [M3_slits] Shape = 1 ; 0-slits, 1-ellipse X_action = 0,0 ; Use 1/0, Show 1/0 X_size = 0,-20.00,-50.0,20.00,50.0 ; joint,Left,L-limit,Right,R-limit Y_action = 0,0 ; Use 1/0, Show 1/0 Y_size = 0,-20.00,-50.0,20.00,50.0 ; joint,Bottom,B-limit,Top,T-limit [M3_BlockCalibration] TOF = 1,1,0,ns ; Input PV(0) or CH(1), A, B, dimension dE = 1,1,0,MeV ; Input PV(0) or CH(1), A, B, dimension X = 1,1,0,mm ; Input PV(0) or CH(1), A, B, dimension Y = 1,1,0,mm ; Input PV(0) or CH(1), A, B, dimension [M3_ProdTarget] ProdTarget = 0 ; 1 - Yes / 0 - No {============================= BLOCK M4 - Material ======================================} [M4_General] Name = F2Si,1 ; Name of Block, Constant name 1/0 Available = 1 ; Use 1/0 Length = 0.000000 m ; Length block for optical blocks [M4_Compound] contents1 = 0,14,1,28.086 ; Nomer,Z,Atoms,Mass thickness = 0,0,2.321,0,0 ; State,Thickness,density,angle,SolidGas Defect = 1,0 ; [0] choice - % or micron at 0 degree, [1]=value; ResolutionE = 0,0.5 ; [0] choice - % or MeV, [1]=value; Resolution2 = 0.1,0.3,0.3 ns,mm,mm ; Time&X&Y space [M4_slits] Shape = 1 ; 0-slits, 1-ellipse X_action = 0,0 ; Use 1/0, Show 1/0 X_size = 328126208,-20.00,-50.0,20.00,50.0 ; joint,Left,L-limit,Right,R-limit Y_action = 0,0 ; Use 1/0, Show 1/0 Y_size = 261,-20.00,-50.0,20.00,50.0 ; joint,Bottom,B-limit,Top,T-limit [M4_BlockCalibration] TOF = 1,1,0,ns ; Input PV(0) or CH(1), A, B, dimension dE = 1,1,0,MeV ; Input PV(0) or CH(1), A, B, dimension X = 1,1,0,mm ; Input PV(0) or CH(1), A, B, dimension Y = 1,1,0,mm ; Input PV(0) or CH(1), A, B, dimension [M4_ProdTarget] ProdTarget = 0 ; 1 - Yes / 0 - No {============================= BLOCK M5 - Material ======================================} [M5_General] Name = F2PPAC,1 ; Name of Block, Constant name 1/0 Available = 1 ; Use 1/0 Length = 0.000000 m ; Length block for optical blocks [M5_Compound] contents1 = 0,14,10,28.086 ; Nomer,Z,Atoms,Mass thickness = 0,0,2.321,0,0 ; State,Thickness,density,angle,SolidGas Defect = 1,0 ; [0] choice - % or micron at 0 degree, [1]=value; ResolutionE = 1,0.2 ; [0] choice - % or MeV, [1]=value; Resolution2 = 0.1,0.05,0.05 ns,mm,mm ; Time&X&Y space [M5_slits] Shape = 0 ; 0-slits, 1-ellipse X_action = 0,0 ; Use 1/0, Show 1/0 X_size = 1,-20.00,-50.0,20.00,50.0 ; joint,Left,L-limit,Right,R-limit Y_action = 0,0 ; Use 1/0, Show 1/0 Y_size = 1,-20.00,-50.0,20.00,50.0 ; joint,Bottom,B-limit,Top,T-limit [M5_BlockCalibration] TOF = 1,1,0,ns ; Input PV(0) or CH(1), A, B, dimension dE = 1,1,0,MeV ; Input PV(0) or CH(1), A, B, dimension X = 1,1,0,mm ; Input PV(0) or CH(1), A, B, dimension Y = 1,1,0,mm ; Input PV(0) or CH(1), A, B, dimension [M5_ProdTarget] ProdTarget = 0 ; 1 - Yes / 0 - No {============================= BLOCK S6 - Drift ======================================} [S6_General] Name = Drift 6,0 ; Name of Block, Constant name 1/0 Available = 1 ; Use 1/0 Length = 0.000000 m ; Length block for optical blocks [S6_slits] Shape = 0 ; 0-slits, 1-ellipse X_action = 0,0 ; Use 1/0, Show 1/0 X_size = 705301464,-20.00,-50.0,20.00,50.0 ; joint,Left,L-limit,Right,R-limit Y_action = 0,0 ; Use 1/0, Show 1/0 Y_size = -2005925888,-20.00,-50.0,20.00,50.0 ; joint,Bottom,B-limit,Top,T-limit [S6_optics] row1 = +1.0000e+00,+0.0000e+00,+0.0000e+00,+0.0000e+00,+0.0000e+00,+0.0000e+00 row2 = +0.0000e+00,+1.0000e+00,+0.0000e+00,+0.0000e+00,+0.0000e+00,+0.0000e+00 row3 = +0.0000e+00,+0.0000e+00,+1.0000e+00,+0.0000e+00,+0.0000e+00,+0.0000e+00 row4 = +0.0000e+00,+0.0000e+00,+0.0000e+00,+1.0000e+00,+0.0000e+00,+0.0000e+00 row5 = +0.0000e+00,+0.0000e+00,+0.0000e+00,+0.0000e+00,+1.0000e+00,+0.0000e+00 row6 = +0.0000e+00,+0.0000e+00,+0.0000e+00,+0.0000e+00,+0.0000e+00,+1.0000e+00 [S6_AngAcceptance] X-Use = 0 ; Use 1/0 X-Value = 1000 mrad ; acceptance Y-Use = 0 ; Use 1/0 Y-Value = 1000 mrad ; acceptance [S6_DriftSettings] Mode = 0 ; Standard 1 / Beamline 0 ShowLength = 0 ; Brho 1 / Length 0